EnsoLite® AFM-Z
Details
AFM-Z is a NBR/PVC closed cell foam product produced in continuous rolls. It is a soft/medium, high density foam that meets ASTM D 1056 2C2/2C3 requirements. This product has good oil/fuel resistance. AFM is an ideal solution for ergonomic mats where fungus resistance is needed.
| EnsoLite® AFM-Z Properties | ||
| Property | Method | Value |
| ASTM D 1056 Designation | - | 2A2 / 2A3 / 2C2 / 2C3 |
| Cell Structure | - | Closed |
| Color | - | Black |
| Compression Deflection 25%, psi (kPa) | ASTM D 1056 | 6 - 12 (41 - 82) |
| Compression Deflection 25% after Heat Aging, % | ASTM D 1056 | ±30 |
| Compression Set (Room temp), % | ASTM D 1056 | 25 max |
| Density, lb/ft3 (kg/m3) | ASTM D 1056 | 12 - 18 (192 - 288) |
| Elongation, % | ASTM D 412 Die A | 100 min |
| Flammability, in (mm) | ASTM D 412 Die A | 0.125 and higher (3.18 and higher) |
| Fluid Immersion, % | ASTM D 1056 | 150 max |
| Hardness, Durometer Shore 00 | ASTM D 2240 | 40 - 60 |
| Service Temperature Low, °F (°C) | ASTM D 1056 | -40 (-40) |
| Service Temperature High Intermittent, °F (°C) | - | 200 (93.3) |
| Tear Strength, lb/in (kN/m) | ASTM D 624 Die C | 23 min (4.0 min) |
| Tensile Strength, psi (kPa) | ASTM D 412 Die A | 90 min (621 min) |
| Water Absorption, % | ASTM D 1056 | 5 max |
Applications
Applications