690 SERIES AEROSPACE SILICONE GASKET FOAM meets BMS 1-68
Insul-Fab offers 690 Series foams, Cellular Silicone materials for gasketing and sealing in aerospace applications. The material meets the general requirements for a low density, closed cell silicone foam rubber for aircraft applications. The 690 series is fire retardant and are suitable for use from -65 degrees to 350 degrees fahrenheit. Additionally, the are resistant to phosphate ester hydraulic fluids and may be used for exterior or interior applications.
Information regarding specification and sizing is set out below, but please contact us for additional information regarding pricing and lead time.
Contact us to request pricing or additional information regarding the 690 Series Aerospace Foam.
PRODUCT APPLICATIONS FOR AIRCRAFT
- Floor Panel mounting and isolation.
- Seals between mating surfaces
- Sound dampening and cushioning
- Fabricated gaskets and pads 690 Series Specifications
| Part | Description | Color | Specifications |
| 690-0406 | Silicone Foam without Adhesive | White, Gray, Black |
BMS 1-68, Grade A, Form II CMS-RB-209 Grade A, Form II DMS 1980 GR1, CU |
| 690-0408 | Silicone Foam with Adhesive | White, Gray, Black |
BMS 1-68, Grade A, Form III CMS-RB-209 Grade A, Form III |
Sizing Chart for 690 Series
| Thickness | Width (Customizable) | Length |
| min 1" (25.40 mm) - max 36" (914 m) | ||
| 1/16” (1.59 mm) | " " | 60’ (18.3 m) |
| 3/32” (2.38 mm) | " " | 60’ (18.3 m) |
| 1/8” (3.18 mm) | " " | 60’ (18.3 m) |
| 3/16” (4.76 mm) | " " | 40’ (12.2 m) |
| 1/4" (6.35 mm) | " " | 40’ (12.2 m) |
| 3/8” (9.53 mm) | " " | 20’ (6.1 m) |
| 1/2” (12.70 mm) | " " | 20’ (6.1 m) |
| 5/8“ (15.88 mm) | " " | 20’ (6.1 m) |
| 3/4” (19.05 mm) | " " | 20’ (6.1 m) |
| 1“ (25.40 mm) | " " | 10’ (3.0 m) |
In addition to the specifications above, the 690 series may also meet the requirements of Airbus Specification ABS 5006, depending upon the thickness and color selection of the material. All orders for the 690 series silicone foams are accompanied by Certificates of Compliance to the relevant specification.